Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual

Page: 1087 / 1304

schematics. Then you may add the wire connection information to the
footprint blocks.
1 Click the Panel Configuration tool.
2 Click Panel wire connection report XYZ offset ref Setup.
3 Define the formats for the "From" TERM annotation text and
symbol.
4 Specify any additional options to include on the "To" compon-
ent TagID.
5 View/test the report.
6 Click OK-Project-wide to format the wire connection annota-
tion project-wide.
Format: schematic layout wire connection
annotation
Defines the default wire connection text format. After you add wire numbers
to your schematics and extract this information, you are ready to annotate
your panel footprint symbols with this information. The information can be
added to the drawing in two different ways. You can build your panel footprint
symbols with some target attributes that are used for the wire connection
information.
Access:
Click the Panel Configuration tool. Click Panel wire connection report XYZ offset
reference Setup.
From the Panel Layout menu, select Panel Configuration. Click Panel wire con-
nection report XYZ offset reference Setup.
NOTE You can build two sets of panel footprint symbols, one set that does not
carry the target attributes for wire information and a set that does. When you
insert your panel symbols from the schematic extract, select Use Footprint tables
to access the first set of symbols or Use Wiring diag tables to access the second
set.
Merge schematic wire numbers onto footprints | 1075