manualshive.com logo in svg

Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual, Page: 1073 / 1304

Share
Download
Autodesk 22505-051400-9000 - AutoCAD Electrical 2008 User Manual Download Page 1073

■

Properties: (available for icons only) Opens a Properties dialog box to
modify the existing symbol icon properties like the icon name/image/block
names and so on. Use the Icon Menu Wizard to change any icon properties.

Insert a copy of a panel footprint

Use the Copy Footprint tool instead of AutoCAD Copy when a panel
component footprint has a balloon or a nameplate associated with it. Since
AutoCAD Electrical establishes invisible Xdata pointers when these are tied
to a footprint, they are properly updated when copied using this utility.

1

On the Panel Layout toolbar, click the Copy Footprint tool.

2

Select the panel component to copy.

3

Click the drawing to specify the insertion point or enter a
value.

The Panel Layout - Component Insert/Edit dialog box displays.

4

Specify any necessary values such as the component tag,
catalog information, or description.

5

Click OK.

Copy code values to components

Use this tool to quickly insert or copy installation, location, group or mount
code values to selected components. These values extract into various reports
and may be useful for sorting or grouping purposes. Copied values show up
on the target footprints as an attribute value if an attribute is present or as
invisible Xdata.

Insert a copy of a panel footprint | 1061

Summary of Contents for 22505-051400-9000 - AutoCAD Electrical 2008

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments