manualshive.com logo in svg

Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual, Page: 324 / 1304

Share
Download
Autodesk 22505-051400-9000 - AutoCAD Electrical 2008 User Manual Download Page 324

Description

Up to 3 lines of description attribute text can be entered. These lines are
automatically filled with a copy of the parent's description text if the parent
Tag name is picked using one of the methods described previously. You can
enter descriptions or select a description from a component on the current
drawing.

Ratings

Specifies values for each ratings attribute. You can enter up to 12 ratings
attributes on a component. Select Defaults to display a list of default values.

NOTE

If Ratings is grayed out, the component you are editing does not carry any

rating attributes.

Show/Edit Miscellaneous

View or edit any attributes that are not predefined AutoCAD Electrical
attributes.

Cross-reference

AutoCAD Electrical automatically fills in cross-reference text when the
cross-reference command is run.

Pins

Assigns pin numbers to the pins that are physically located on the component.

Insert from catalog lists

Use this to annotate the selected schematic (or panel) component with the
catalog number or a component description selected from a user-defined pick
list and insert it into the drawing.

312 | Chapter 6   Component Tools

Summary of Contents for 22505-051400-9000 - AutoCAD Electrical 2008

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments