manualshive.com logo in svg

Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual, Page: 594 / 1304

Share
Download
Autodesk 22505-051400-9000 - AutoCAD Electrical 2008 User Manual Download Page 594

Create terminal strips

Use the Terminal Strip utility to create non-intelligent terminal strips. The
terminal numbers can be imported from a file, windowed on one or more
drawings, individually picked, typed in by hand, or all of the above.

1

Select Components 

 ➤ 

 Components Miscellaneous 

 ➤ 

 Terminal Strip

Utilities.

2

Select a method to use for creating the terminal strips.

■

Terminal List (Manual Picks):

 Select to pick or window the text and/or

attribute values you want to import into the terminal strip generator
utility.

■

Terminal List (From File):

 Select the file containing the terminal text.

3

Press Enter to end the selection.

The Terminal Strip Representation dialog box displays.

4

In the Terminal Strip Representation dialog box, sort, add, remove, and
re-arrange the terminal strip layout.

5

Click OK.

The Terminal Strip Representation Setup dialog box displays. Set the text
size, terminal height and width sizes, and terminal strip orientation.

6

Make your selections and click OK.

7

Select the insertion point for your terminal strip.

Modify an existing terminal strip

1

Re-invoke the command, window the existing terminal strip to capture
the existing terminal numbers.

2

Cancel the command.

3

Delete the old terminal strip.

4

Re-invoke the terminal strip utility.

5

Make any edits and re-insert the terminal strip.

Terminal strip representation

582 | Chapter 9   Terminal Tools

Summary of Contents for 22505-051400-9000 - AutoCAD Electrical 2008

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments