manualshive.com logo in svg

Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual, Page: 912 / 1304

Share
Download
Autodesk 22505-051400-9000 - AutoCAD Electrical 2008 User Manual Download Page 912

Connector Details report

This report extracts the component wire connection data and displays it in a
dialog box. Each entry shows a connection to a component, the wire number,
component tag name, terminal pin number, component location code (if
present), and the layer that the connected wire is on.

Cable Summary report

This project-wide cable conductor report gives a report listing all of the cable
marker tags (parent tags) found.

Cable From/To report

This project-wide cable conductor report lists the "from / to" for each cable
conductor along with the conductor's parent cable number, conductor color
code, and wire number (if present).

Wire Label report

This report lists wire markers/labels and can be used to create physical wire
or cable labels.

900 | Chapter 14   Reports

Summary of Contents for 22505-051400-9000 - AutoCAD Electrical 2008

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments