manualshive.com logo in svg

Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual, Page: 373 / 1304

Share
Download
Autodesk 22505-051400-9000 - AutoCAD Electrical 2008 User Manual Download Page 373

Change cross-reference visibility

This tool changes the visibility of the cross-reference XREF attribute. In most
cases the cross-referencing should be visible but there are times when you
may not want the cross-referencing displayed on parent symbols.

1

Click the arrow on the Component Cross-Referencing tool to
access the Hide/Unhide Cross-Reference tool.

2

Click the Hide/Unhide Cross-Referencing tool.

3

Select the objects whose cross-referencing you want to hide
or display. Single selection, window selection or multiple se-
lection is allowed.

4

Right-click to end the selection and apply the command.

Insert a dashed link line

This tool draws a smart dashed line between stacked contacts of a multicontact
component. When the dashed link line inserts, the TAG2 and DESC attributes
of the 2nd through nth components you select for linking automatically flip
to invisible. Use the Attribute Hide command to turn the visibility of the
selected attributes back on.

Change cross-reference visibility | 361

Summary of Contents for 22505-051400-9000 - AutoCAD Electrical 2008

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments