Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual

Page: 91 / 1304

Marked with "+[4]" in columns 1-4 followed by file. This
can be a full path or just the icon menu file name itself
(such as ACE_PANEL_MENU.DAT). Panel icon menu file
Marked with "+[5]" followed by 1= automatic/real-time,
0= cross-reference command must be explicitly invoked. Real-time inter-drawing update
Marked with "+[6]" followed by 1=always use MISC_CAT
for catalog lookup, 2= use MISC_CAT if component specific Use MISC_CAT table
table not found, 0 or entry omitted = use component-spe-
cific only.
Marked with "+[9]" followed by comma-delimited list. This
gives a list of project properties
➤
description entries that
are included as a header for generated reports.
LINEx entries for reports
Marked with "+[10]" followed by 0= Combined Installa-
tion/Location component tag mode is “off”, 1= mode is Combined Installation/Location/Tag
“on”, 3= mode is “on” and include Installation/Location
as a tag prefix.
Marked with "+[11]" followed by 0= allow entered DESC1-
DESC3 to be upper/lower case, missing or 1= force all
entered DESC1-DESC3 values to uppercase. DESC case mode
Marked with "+[13]" followed by 0 or missing= wire tagging
normal mode (wires combined into one wire number as- Wire network mode
signment), 1=per wire basis mode (each connected wire
gets its own wire number assignment).
Marked with "+[14]" followed by 0 or missing= add prefix
to TAG when output to reports, 1=suppress adding the IEC style Installation/Location tag
prefix to TAG for reports, 3=suppress Installation/Location
tag prefix when match drawing-wide Installation/Location
default values for reports. This option is only used when
+[10] above is set to 1 or 3.
Marked with "+[15]" followed by 1= component insert to
auto-fill Installation/Location attributes with drawing de- Auto-fill Installation/Location
Overview of the project file format | 79