Autodesk 22505-051400-9000 - AutoCAD Electrical 2008, User Manual, Page: 1037 / 1304

NOTE You can make this block visible by typing ATTMODE at the AutoCAD
command line prompt, changing the value from 1 to 2, and then typing REGEN.
Access:
Click the Panel Configuration tool.
From the Panel Layout menu, select Panel Configuration.
There are a few settings related to panel layout drawings that can be modified
through the Panel Configuration dialog box. These settings are retrieved and
saved back to attributes on the non-visible block named WD_PNLM.
Item Numbering
Specifies the number/letter to use as the first item number. AutoCAD Electrical
will manage item number, drawing-wide or project-wide (over many drawings),
so that the same number is always applied to identical components.
Balloon
Opens a sub-dialog box for setting the type of balloon marker (circle, ellipse,
polygon, text), marker size, margin, and text gap.
Footprint layers
Opens the Panel Component Layers sub-dialog box for setting the panel
component layers, non-text graphic layers, and nameplate layers. Panel
footprint layering works in the same way AutoCAD Electrical schematic
layering. When AutoCAD Electrical inserts a footprint, it is modified on the
fly to match the layering scheme set up in this dialog.
Wiring level defaults
Sets the optional 3-digit wiring level codes. These are applied as defaults when
codes are not defined on panel layout components or terminal strip
representations. Preferred wire connection sequence follows this level and
numeric-code-within-level hierarchy.
Default spacing for multiple inserts
Specifies the x and y distance spacing for multiple footprint inserts.
Panel drawing configuration and defaults | 1025