manualshive.com logo in svg

Autodesk 057B1-41A111-1001 - AutoCAD LT 2010, User Manual

Get the Autodesk 057B1-41A111-1001 - AutoCAD LT 2010 User Manual for free download. This comprehensive manual provides step-by-step instructions and valuable insights for mastering AutoCAD LT 2010. Enhance your design skills and unlock the full potential of this powerful software. Download it now from manualshive.com.

Share
Download
background image

■

Top. Aligns snap and grid along 30- and 150-degree axes.

■

Right. Aligns snap and grid along 30- and 90-degree axes.

Choosing one of the three isometric planes causes Ortho and the crosshairs
to be aligned along the corresponding isometric axes. For example, when
Ortho is on, the points you specify align along the simulated plane you are
drawing on. Therefore, you can draw the top plane, switch to the left plane
to draw another side, and switch to the right plane to complete the drawing.

Draw Isometric Circles

Represent circles on isometric planes using ellipses.

If you are drawing on isometric planes, use an ellipse to represent a circle
viewed from an oblique angle. The easiest way to draw an ellipse with the
correct shape is to use the Isocircle option of ELLIPSE. The Isocircle option is
available only when the Style option of Snap mode is set to Isometric (see
DSETTINGS).

NOTE

To represent concentric circles, draw another ellipse with the same center

rather than offsetting the original ellipse. Offsetting produces an oval-shaped spline
that does not represent foreshortened distances as you would expect.

522 | Chapter 13   Render Drawings

Summary of Contents for 057B1-41A111-1001 - AutoCAD LT 2010































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 057B1-41A111-1001 - AutoCAD LT 2010

MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Brand: MACROMEDIA Pages: 72
ASCOM TEMS VISUALIZATION 7.1 PROFESSIONAL Datasheet preview
TEMS VISUALIZATION 7.1 PROFESSIONAL
Brand: ASCOM Pages: 8
Amazon Appointment Request Portal User Manual preview
Appointment Request Portal
Brand: Amazon Pages: 16
Sun Microsystems 2005Q2 Quick Start Manual preview
2005Q2
Brand: Sun Microsystems Pages: 38
McAfee VirusScan Plus User Manual preview
VirusScan Plus
Brand: McAfee Pages: 205
Drobo How-To Manual preview
How-To
Brand: Drobo Pages: 6
Symantec ALTIRIS 6 INVENTORY SOLUTION Datasheet preview
ALTIRIS 6 INVENTORY SOLUTION
Brand: Symantec Pages: 2
MACROMEDIA DRUMBEAT 2000 ECOMMERCE EDITION User Manual preview
DRUMBEAT 2000 ECOMMERCE EDITION
Brand: MACROMEDIA Pages: 238
SSI TROPOS SUPERSEARCH 2.4.0.000 Installation Manual preview
TROPOS SUPERSEARCH 2.4.0.000
Brand: SSI Pages: 8
SMART SMART Notebook SE Installation Manual preview
SMART Notebook SE
Brand: SMART Pages: 20
F-SECURE Internet Gatekeeper Administrator'S Manual preview
Internet Gatekeeper
Brand: F-SECURE Pages: 414
Yamaha Sound Editor ver. 2.10 Installation Manual preview
Sound Editor ver. 2.10
Brand: Yamaha Pages: 11
Yamaha Song Filer Manual preview
Song Filer
Brand: Yamaha Pages: 11
Yamaha mLAN Patchbay Manual preview
mLAN Patchbay
Brand: Yamaha Pages: 17
Yamaha FIRESTATION MLAN PATCHBAY Manual preview
FIRESTATION MLAN PATCHBAY
Brand: Yamaha Pages: 17
Yamaha S03 voice editor Software Installation Manual preview
S03 voice editor
Brand: Yamaha Pages: 20
Yamaha S08 Voice Editor Software Installation Manual preview
S08 Voice Editor
Brand: Yamaha Pages: 24
Yamaha File Utility Manual preview
File Utility
Brand: Yamaha Pages: 28

Brands by name

Popular brands

Load more brands