manualshive.com logo in svg

Autodesk 057B1-41A111-1001 - AutoCAD LT 2010, User Manual

Get the Autodesk 057B1-41A111-1001 - AutoCAD LT 2010 User Manual for free download. This comprehensive manual provides step-by-step instructions and valuable insights for mastering AutoCAD LT 2010. Enhance your design skills and unlock the full potential of this powerful software. Download it now from manualshive.com.

Share
Download
background image

Description

Keyboard Shortcut

Nudges the selected objects to the left in
the drawing area.

Control-Arrow Left

Nudges the selected objects to the right in
the drawing area.

Control-Arrow Right

Nudges the selected objects up in the
drawing area.

Control-Arrow Up

Nudges the selected objects down in the
drawing area.

Control-Arrow Down

Toggles group selection mode on and off.

Shift-Control-A

Toggles grid snap mode on and off.

Shift-Control-B

Copies the selected objects to the Clipboard
with a specified base point.

Shift-Control-C

Toggles object snap mode on and off.

Shift-Control-F

Toggles grid display on and off.

Shift-Control-G

Repeats the previous command.

Shift-Control-J

Repeats the previous command.

Shift-Control-M

Toggles ortho mode on and off.

Shift-Control-O

Displays the Save Drawing As dialog box.

Shift-Control-S

Toggles polar tracking on and off.

Shift-Control-U

Removes the selected objects from the
drawing.

Delete

Start a Command | 21

Summary of Contents for 057B1-41A111-1001 - AutoCAD LT 2010































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 057B1-41A111-1001 - AutoCAD LT 2010

Altigen Altiware HPBX 5.0A Administration Manual preview
Altiware HPBX 5.0A
Brand: Altigen Pages: 490
M-Audio NRV10 User Manual preview
NRV10
Brand: M-Audio Pages: 32
Alcatel-Lucent AUTOMATED MESSAGE DELIVERY SYSTEM 5.0 Quick Start Manual preview
AUTOMATED MESSAGE DELIVERY SYSTEM 5.0
Brand: Alcatel-Lucent Pages: 4
Adobe CAPTIVATE 2 Use Manual preview
CAPTIVATE 2
Brand: Adobe Pages: 306
RTS RTS ISDN 2002 Operator'S Manual preview
RTS ISDN 2002
Brand: RTS Pages: 51
Novell LOGIN SCRIPTS Manual preview
LOGIN SCRIPTS
Brand: Novell Pages: 64
Brother PE-Design Next Instruction Manual preview
PE-Design Next
Brand: Brother Pages: 320
GE eKEY User Manual preview
eKEY
Brand: GE Pages: 82
NEC NECSAM RICHER APPT FINAL2 Manual preview
NECSAM RICHER APPT FINAL2
Brand: NEC Pages: 1
NEC NECAM NEWSREL 070306 Manual preview
NECAM NEWSREL 070306
Brand: NEC Pages: 2
NEC NEC Hiperwall Quick Start Manual preview
NEC Hiperwall
Brand: NEC Pages: 3
NEC N412I - 1 Operation Manual preview
N412I - 1
Brand: NEC Pages: 9
NEC MultiProfiler User Manual preview
MultiProfiler
Brand: NEC Pages: 49
NEC SMB8000 Manual preview
SMB8000
Brand: NEC Pages: 56
NEC NEC Storage PathManager 3.1 User Manual preview
NEC Storage PathManager 3.1
Brand: NEC Pages: 65
NEC MultiSync FP1375X User Manual preview
MultiSync FP1375X
Brand: NEC Pages: 64
NEC MultiSync FP955 User Manual preview
MultiSync FP955
Brand: NEC Pages: 68
Altigen Call Detail Reporting Manual preview
Call Detail Reporting
Brand: Altigen Pages: 97

Brands by name

Popular brands

Load more brands