manualshive.com logo in svg

Autodesk 057B1-41A111-1001 - AutoCAD LT 2010, User Manual

Share
Download
Autodesk 057B1-41A111-1001 - AutoCAD LT 2010 User Manual Download Page 487

In case of rectangular grip editing, you can maintain the closed four-sided
rectangle or square shape of the rectangular clipping boundary because two
vertices of the same side of the rectangular clipping boundary are edited
together.

NOTE

With Clipping boundaries, you cannot display self-intersecting polygonal

boundaries. An error message is displayed and the boundary reverts to the last
boundary.

Limitations for Clipping Boundaries

When clipping an referenced drawing or block the following limitations apply:

■

A clipping boundary can be specified anywhere in 3D space, but it is always
applied planar to the current UCS.

■

If a polyline is selected, the clipping boundary is applied in the plane of
that polyline.

■

Images in external references or blocks are always clipped within the
rectangular extents of the reference. When you apply polygonal clipping
to images in externally referenced drawings, the clipping boundary is
applied to the rectangular extents of the polygonal boundary, rather than
to the polygon itself.

See also:

Clip Raster Images 

 (page 497)

Clip Underlays 

 (page 487)

Edit Referenced Drawings

Referenced drawings can be edited by opening them directly, or you can edit
the xref in place from within the current drawing. You can edit a block
definition directly from any selected block reference.

Edit a Referenced Drawing in a Separate Window

While the simplest and most direct method for editing xrefs is to open the
source file for the referenced drawing, there is an alternative that can be more
convenient.

Reference Other Drawing Files | 467

Summary of Contents for 057B1-41A111-1001 - AutoCAD LT 2010































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands