manualshive.com logo in svg

Autodesk 057B1-41A111-1001 - AutoCAD LT 2010, User Manual

Share
Download
Autodesk 057B1-41A111-1001 - AutoCAD LT 2010 User Manual Download Page 258

Create Chamfers

A chamfer connects two objects to meet in a flattened or beveled corner.

A chamfer connects two objects with an angled line. It is usually used to
represent a beveled edge on a corner.

You can chamfer

■

Lines

■

Polylines

■

Rays

■

Xlines

CHAMFER can be used to bevel all corners of a polyline using a single
command.

NOTE

Chamfering a hatch boundary that was defined from line segments removes

hatch associativity. If the hatch boundary was defined from a polyline, associativity
is maintained.

If both objects being chamfered are on the same layer, the chamfer line is
created on that layer. Otherwise, the chamfer line is created on the current
layer. The layer affects object properties including color and linetype.

Use the Multiple option to chamfer more than one set of objects without
leaving the command.

238 | Chapter 6   Create and Modify Objects

Summary of Contents for 057B1-41A111-1001 - AutoCAD LT 2010































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands