manualshive.com logo in svg

Autodesk 057B1-41A111-1001 - AutoCAD LT 2010, User Manual

Share
Download
Autodesk 057B1-41A111-1001 - AutoCAD LT 2010 User Manual Download Page 426

Once a jogged radius dimension is created, you can modify the jog and the
center location override by

■

Using grips to move the features

■

Changing the locations of the features with the Properties Inspector

■

Using STRETCH

NOTE

Jogged radius dimensions can be viewed but not edited in versions previous

to AutoCAD LT 2006. Also, if you make dramatic changes to the associated
geometry, you may get unpredictable results for the jogged radius dimension.

See also:

Fit Dimension Text Within Extension Lines

 (page 385)

Create Angular Dimensions

Angular dimensions measure the angle between two lines or three points.

To measure the angle between two radii of a circle, you select the circle and
specify the angle endpoints. With other objects, you select the objects and
then specify the dimension location. You can also dimension an angle by
specifying the angle vertex and endpoints. As you create the dimension, you
can modify the text content and alignment before specifying the dimension
line location.

406 | Chapter 9   Annotate Drawings

Summary of Contents for 057B1-41A111-1001 - AutoCAD LT 2010































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands