SIP User's Manual
3
.
Installing
the MediaPack
Version 2.4
27
June 2008
Figure
3-7: RJ-45 Connector Pinouts for ISDN S/T Interface
¾
To connect the BRI S/T interface take the next 2 steps:
1.
Connect the ISDN splitter cable's RJ-45 connector to one of the BRI S/T ports (labeled
S/T
) on the MediaPack's rear panel.
2.
Connect the ISDN terminal equipment to one of the RJ-45 ports on the ISDN splitter
using an RJ-45 connector.
Figure
3-8: ISDN BRI S/T Cabling
3.4.4
Connecting the RS-232 Serial Interface
The RS-232 interface can be used for local configuration using Command Line Interface
(CLI). For a description on accessing the CLI using the RS-232 interface, refer to Section
'
637H657H
RS-232 Interface
' on page
638H658H
57.
