SIP User's Manual
A
.
MediaPack
Applications
Version 2.4
143
June 2008
A.1.4 Using
Point-to-Multipoint
Connections, PBX Trunk Interface
A Point-to-Multipoint connection between the PBX and the MediaPack is illustrated in the
network architecture diagram below (
1079H1133H
Figure
A-5
). The MediaPack is connected to the
PBX’s Trunk interface. In other words, the MediaPack provides an ISDN Network and the
PBX is a User/Terminal device.
Figure
A-5: Connecting to PBX using Point-to- Multipoint Connection, PBX Trunk Interface
To configure the MediaPack connection to the PBX:
1.
Perform the initial configuration of the MediaPack’s IP interfaces and network settings
(refer to Section '
1080H1134H
Connecting MediaPack's LAN Interface to your PC
' on page
1081H1135H
32
).
2.
Access the ‘ISDN Ports’ screen (
Protocol Management
menu >
ISDN
submenu >
ISDN Port Settings
option).
Figure
A-6: ISDN Ports Screen
