SIP User's Manual
2
.
MediaPack
Physical Description
Version 2.4
19
June 2008
2 MediaPack
Physical
Description
This section provides detailed information on the hardware, the location and functionality of
the LEDs, buttons and connectors on the front and rear panels of the MediaPack gateway.
For detailed information on installing the MediaPack, refer to Chapter
596H616H
3
on page
597H617H
21
.
2.1
Physical Description
2.1.1 Front
Panel
598H618H
Figure
2-1
displays the front panel of the MediaPack. For a description of the Reset button,
refer to '
599H619H
Reset Button'
on page
600H620H
19
; for a description of the front panel LEDs, refer to '
601H621H
Front
Panel LEDs
' on page
602H622H
19 (below)
.
Figure
2-1: MediaPack Front Panel
2.1.1.1 Reset Button
The front panel of the MediaPack provides a reset button for resetting the gateway and
restoring the gateway's parameters to factory defaults (Refer to '
603H623H
Resetting the MediaPack
'
on page
604H624H
131
).
To reset the gateway, press the reset button with a paper clip or any other similar pointed
object. To reset the gateway to factory default settings, press the button continuously for
approximately 15 seconds.
2.1.1.2 Front Panel LEDs
605H625H
Table
2-1
lists and describes the front panel LEDs on the MediaPack.
Table
2-1: MediaPack Front Panel LEDs Description
Label
Color
State
Function
Green
On
Device Powered, self-test OK
Orange Blinking
Software
Loading/Initialization
Ready
Red On Malfunction
Control
Green Blinking
Transmitting
RTP
packets
S/T
Green On B-Channel
active
