SIP User's Manual
6
.
Configuring
the MediaPack
Version 2.4
159
June 2008
6.2.1.3 SIP Users
The
SIP Users
option opens the 'SIP Users' screen. This screen is used to define up to 32
SIP users, by name and password.
¾
To configure SIP users:
1.
Open the ‘SIP Users' screen (
Protocol Management
menu >
SIP Gateway
submenu
>
SIP Users
option).
Figure
6-3: SIP Users Screen
2.
Configure the SIP users according to
861H888H
Table
6-3
.
3.
Click the
Submit
button to apply your changes.
4.
To save the changes to the flash memory, refer to Section
889H
6.9
, ’
890H
Saving Configuration
Settings on the MediaPack
’ on page
891H
131
).
Table
6-3: SIP Users Parameters
Parameter
Description
Name
User name used to register and authenticate with a registrar or to authenticate with a
proxy.
This user name is only used if the Authentication Mode parameter is set to Per User.
Password
Password used to authenticate with a registrar or a proxy.
This password is only used if the Authentication Mode parameter is set to Per User.
Authentication User
User name used for authentication. If not defined, the user name is used.
Using CLI
