SIP User's Manual
6
.
Configuring
the MediaPack
Version 2.4
159
June 2008
Table
6-24: User Management CLI Parameters
Parameter
Description
User Name
User name used to log in to the management system.
Password
Password required to log in to the management system
Access
Read-only or Read/Write access rights.
Using CLI
To define User Management parameters via CLI:
1.
Log on to the system.
2.
Change to the configuration mode.
3.
To configure a read-only user, use the command:
operator
<name>
password
<password>
4.
To add a read / write user, use the command:
administrator <name> password <password>
6.6
Status & Diagnostics
You can view the MediaPack's general system information using the
Status & Diagnostic
menu on the main menu bar.
6.6.1 System
Information
To view the MediaPack's system information, take the following step:
Open the 'System Information' screen (
Status & Diagnostics
menu >
System
Information
submenu > System Information option).
Figure
6-32: System Information Screen
