MP-40x SIP MediaPack BRI Series
SIP User's Manual
142
Document #: LTRT-53301
Figure
A-4 ISDN Profiles
8.
From the 'ISDN Interfaces' list, select the ISDN interface that is bind to the ISDN port
configured above.
9.
Configure the MSN Suffix (Identical to an ISDN Phone MSN configuration). For
additional information regarding MSN, refer to Section
'
1073H1126H
MSN
' on page
1074H1127H
153
.
10.
Click
Submit
to apply your changes.
11.
To save the changes to the flash memory, refer to Section
1128H
6.9
,
’
1129H
Saving Configuration
Settings on the MediaPack
’ on page
1130H
131
).
12.
Return to the initial settings and continue the configuration of the MediaPack SIP
Parameters and routing tables (refer to Section '
1077H1131H
Configuring the SIP Parameters
' on
page
1078H1132H
44
).
Note:
In this current network architecture, the MediaPack is configured
identically to an ISDN Phone device (User Interface, Point to Multipoint
connection). Therefore, the MSN configuration is required. During a call
setup, the complete destination number is verified against the MSN. As
a result, in this setup, digit-by-digit dialing towards the MediaPack is not
supported (in ISDN standard Overlap Receiving on ISDN User Side).
