SIP User's Manual
A
.
MediaPack
Applications
Version 2.4
139
June 2008
A.1.3
Using Point-to-Multipoint Connections, PBX Subscriber Interface
A Point-to-Multipoint connection between the PBX and the MediaPack is illustrated in the
network architecture diagram below (
1070H1123H
Figure
A-3
). The MediaPack is connected to the
PBX’s Subscriber interface. In other words, the PBX provides an ISDN Network and the
MediaPack is a User/Terminal device.
Figure
A-3: Connecting to a PBX using Point-to- Multipoint Connection, PBX Subscriber
Interface
To configure the MediaPack connection to the PBX:
1.
Perform the initial configuration of the MediaPack’s IP interfaces and network settings
(refer to Section '
1071H1124H
Connecting MediaPack's LAN Interface to your PC
' on page
1072H1125H
32
).
2.
Access the ‘ISDN Ports’ screen (
Protocol Management
menu >
ISDN
submenu >
ISDN Port Settings
option).