SIP User's Manual
4
.
Initial
Configuration
Version 2.4
35
June 2008
•
PPPoE:
ensure that you have a PPPoE server in your WAN network. Define the
‘PPPoE Username’ and ‘PPPoE Password’ fields to correspond with your PPPoE
server authorization. The assigned IP address and subnet mask are displayed in
the ‘Current IP Address’ and ‘Current Subnet Mask’ fields. To define the WAN
PPPoE Default Gateway, refer to Step
687H713H
6.
5.
Click the
Submit
button; the MediaPack applies the changes.
6.
To configure the default gateway (relevant for static and PPPoE WAN interface
modes), perform the following:
a.
Access the 'Static Routing Table' screen (
Advanced Configuration
menu >
Network Settings
submenu >
Static Routes
option).
Figure
4-5: Static Routing Table Screen
b.
Add a static route entry with the following values based on our example setup:
♦
Dest IP:
0.0.0.0
♦
Dest Mask:
0.0.0.0
♦
GW IP (i.e., default gateway):
10.15.0.1
c.
Click the
Insert
button; the static routing entry is added to the table, as shown in
688H714H
Figure
4-5
above.
7.
Save the configuration (refer to Section '
689H715H
Saving the Configuration Settings
' on page
690H716H
50
).
Note:
Internet Explorer’s security settings may block access to the gateway’s
embedded Web server if they’re configured incorrectly. In such a scenario,
the following message is displayed:
"Unauthorized: Correct authorization is required for this area. Either your
browser does not perform authorization or your authorization has failed.
RomPager server."
To troubleshoot blocked access, perform the following 2 steps:
1.
Delete all cookies from the Temporary Internet files. If this does not
solve the problem, the security settings may need to be altered (refer
to Step 2).
