MP-40x SIP MediaPack BRI Series
SIP User's Manual
50
Document #: LTRT-53301
Figure
4-15: Tel to IP Routing Table Screen
2.
Add the four entries displayed in the figure above by performing the following:
a.
From the ‘Position' drop-down list, select the entry that you want to add.
b.
In the ‘Destination Number’ field, enter the extension number you need to reach.
c.
In the ‘Destination IP’ field, enter the destination IP address.
d.
Click the
Insert
button to add the entry.
For detailed information on the Tel to IP Routing table, refer to Section '
719H745H
Tel to IP Routing
Table
' on page
720H746H
90
.
4.1.10 Saving
the
Configuration Settings
To ensure that the currently modified configuration is permanently applied, you must save it
to the MediaPack's non-volatile memory.
¾
To save the configuration changes to the non-volatile memory take
the next 2 steps:
1.
On the main menu bar, click the
Maintenance
button; the ‘Maintenance’ screen is
displayed.
