MP-40x SIP MediaPack BRI Series
SIP User's Manual
100
Document #: LTRT-53301
Table
6-16: Coder Group Parameters
Parameter
Description
ID
Defines the coder group ID.
Valid range is 1 to 5.
Coder
Defines the coder.
For a list of valid options see the list above.
Packetization
Defines the packetization time.
For a list of valid options see the list above.
Using CLI
To define the Coder Group parameters:
1.
Log on to the system.
2.
From the main configuration mode, change to the “profile coder-group” mode.
3.
To enter the “profile voice isdn” mode, use the command:
profile coder-group
<1..5>
The last number indicates the coder group.
4.
Define the coders in this coder group. To define a coder, use the command:
coder
<num> <coder> [<bit rate>] <packetization time>
Where the valid range for <num> is: 1 to 5. T
he <bit rate> must be specified or G.726 and
G.727
.
For a list of valid combinations of coder and packetization time see the list at the beginning of this section.
6.3
Advanced Configuration
The
Advanced Configuration
menu is used to configure the gateway’s advanced
configuration parameters, and includes the following submenus:
Network Settings (refer to Section '
961H1018H
Network Settings
' on page
962H1019H
100
)
Configuration File (refer to Section
1020H
5.4.3 '
1021H
Configuration File Examples
961H
' on page
962H1022H621023H621024H
62)
User Management (refer to
1025H
Figure
6-30
on page
964H1026H
119
)
6.3.1 Network
Settings
From the Network Settings you can define the following networking parameters:
IP and Ethernet settings (refer to Section '
965H1027H
IP Interfaces
' on page
966H1028H
101
)
PPPoE parameters (refer to Section '
967H1029H
PPPoE
' on page
968H1030H
103
)
IP static routes (refer to Section '
969H1031H
Static Routes
' on page
970H1032H
105
)
IP dynamic routes (refer to Section '
971H1033H
Dynamic Routes
' on page
972H1034H
106
)
QoS (refer to Section '
973H1035H
QoS'
on page
974H1036H
107
)
QoS Source Classes and Packet Tagging (refer to Section '
1037H
QoS Source Classes and
Packet Tagging’ on page
976H1038H
110
)
Access control list (refer to Section '
977H1039H
Access Control List
' on page
978H1040H
111
)
Routing Information Protocol -- RIP (refer to Section '
981H1041H
RIP
' on page
982H1042H
114
)
DHCP server, DNS, and SNTP clients settings (refer to Section '
983H1043H
Services
' on page
984H1044H
115
)
