SIP User's Manual
4
.
Initial
Configuration
Version 2.4
31
June 2008
4 Initial
Configuration
This section leads you through the initial and basic configuration procedures for setting up
the MediaPack. Initial configuration includes establishing IP connectivity with the device.
The initial and basic configuration comprises the following steps:
Connecting the MediaPack to your PC (refer to Section '
641H661H
Connecting MediaPack's LAN
Interface to your PC
' on page
642H662H
32
)
Configuring the MediaPack's IP address (refer to Section '
643H663H
Configuring the
MediaPack's LAN and WAN IP Address
' on page
644H664H
33
)
Connecting the MediaPack to your network (refer to Section '
645H665H
Connecting the
MediaPack to the Network
' on page
646H666H
40
)
Configuring the ISDN ports (refer to Section '
647H667H
Configuring the ISDN Ports
' on page
648H668H
41
)
Configuring the ISDN interfaces (refer to Section '
649H669H
Configuring the ISDN Interface
' on
page
650H670H
42
)
Configuring the SIP parameters (refer to Section '
651H671H
Configuring the SIP Parameters
' on
page
652H672H
44
)
Configuring Coder Groups (refer to Section '
653H673H
Configuring Coder Groups
' on page
654H674H
47
)
Configuring the IP to Tel Routing table (refer to Section '
655H675H
Configuring IP to Tel Routing
Table
' on page
656H676H
48
)
Configuring the Tel to IP Routing table (refer to Section '
657H677H
Configuring Tel to IP Routing
Table
' on page
658H678H
49
)
Saving the configuration (refer to Section '
659H679H
Saving the Configuration
' on page
660H680H
47
)
Configuring the ISDN telephone units (refer to Section '
661H681H
Configuring the ISDN
Telephone Units
' on page
662H682H
51
)
Establishing a call between units A and B (refer to Section '
663H683H
Establishing a Call
between Units A and B
' on page
664H684H
51
)
At the end of each step, a reference to the relevant section is provided where advanced
configuration options are described in detail.
The initial configuration described in this section is based on the network architecture
example shown in
665H685H
Figure
4-1
. The configuration of MediaPack units A and B are almost
identical, and therefore, the initial configuration only relates to the configuration of unit A.
Figure
4-1: Network Architecture Example for Initial Configuration
