SIP User's Manual
6
.
Configuring
the MediaPack
Version 2.4
159
June 2008
Parameter
Description
copy tftp
Loads the new software using TFTP to the MediaPack.
The format is:
copy tftp
://<IP address of your TFTP server>/<name of the directory in which
the new SW files are located> / <name of the download script>
Using CLI
To upgrade the MediaPack software via CLI:
1.
Open a CLI session using Telnet or a serial connection.
2.
Log on to the system. Default username and password: user=”Admin”; password=”Admin”.
3.
Type the
enable
command to acquire administrative privileges.
4.
Change the "execution" mode to “configuration”.
5.
Use the following command:
copy tftp
For example:
copy tftp
://10.33.2.2/mp40x_sip_2_0_17_9328/mp40x_sip_2_0_17_9328 flash.
To activate the new version (after the SW version download process completes),
reset the MediaPack
.
To view the downloaded SW version (after the gateway is reset), use the command
show version
.
Note:
An upgrade procedure can only be performed in execution mode with administrative privileges.
6.8
Automatic Software & Configuration File
Upgrade
The automatic upgrade process is triggered by the configured update time. The automatic
upgrade process is executed in the following order:
1.) Check call progress tones; upgrade, if different
2.) Check configuration; upgrade, if different
3.) Check software image; upgrade, if different
6.8.1
Call Progress Tone (CPT) file and Config file
If the file at the given http URL is different to the existing one, it will be downloaded and
stored to flash. On the next boot it will be executed.
6.8.2
Automatic Software Upgrade Using http Download
If the software image version is different to the existing version, the image will be
downloaded and prepared to be executed on the next boot.
