AudioCodes Mediant 4000 SBC, User Manual

Page: 921 / 1037

CHAPTER 60 Configuration Parameters Reference
Mediant 4000 SBC | User's Manual
Parameter Description
For more information, see
Configuring Default DNS
Servers
on page 119.
'Default Secondary DNS Server IP'
configure network > dns settings > dns-
default-secondary-server-ip
[DefaultSecondaryDnsServerIp]
Defines the address of the
default secondary DNS
server.
The valid value is an IP
address in dotted-decimal
notation. The default is
8.8.4.4.
For more information, see
Configuring Default DNS
Servers
on page 119.
DHCP Parameters
The Dynamic Host Control Protocol (DHCP) parameters are described in the table below.
Table 60-14:DHCP Parameters
Parameter Description
'Enable DHCP'
[DHCPEnable]
Enables DHCP client functionality.
■ [0] Disable (default)
■ [1] Enable
Note:
■ For the parameter to take effect, a device reset is required.
■ For a detailed description of DHCP, see DHCP-based
Provisioning .
■ The parameter is a "hidden" parameter. Once defined and
saved to flash memory, its value doesn't revert to default even
if the parameter doesn't appear in the
ini file.
[DhcpOption160Support] Enables the use of DHCP Option 160.
■ [0] = (Default) Disable
■ [1] = Enable
For more information, see Provisioning the Device using DHCP
Option 160 on page 695.
Note: For the parameter to take effect, a device reset is required.
[DHCP120OptionMode] Enables the acceptance of DHCP Option 120 in DHCP responses
sent by a DHCP server.
■ [0] = DHCP Option 120 is not supported and ignored if
received in the DHCP response.
■ [1] = (Default) DHCP Option 120 is supported and if received,
the device adds the SIP server information to the Proxy Set.
[DHCPSpeedFactor] Defines the device's DHCP renewal speed for a leased IP
address from a DHCP server.
- 888 -