AudioCodes Mediant 4000 SBC, User Manual

Page: 1026 / 1037

CHAPTER 60 Configuration Parameters Reference
Mediant 4000 SBC | User's Manual
Parameter Description
■ [1] RFC 7865 = The device generates the recording
metadata in a format that is according to RFC 7865,
whereby all IDs (e.g., participant ID) are in Base64
format. This metadata format also includes additional
XML tags with association information (e.g.,
"<participantsessionassoc>").
'SIP Recording Time Stamp
Format'
configure voip > sip-
definition sip-
recording settings >
siprec-time-stamp
[SIPRecTimeStamp]
Defines the format of the device's time (timestamp) in SIP
messages that are sent to the SIP Recording Server
(SRS).
■ [0] Local Time = (Default) The device's local time
(without the UTC time zone) is used for the timestamp.
■ [1] UTC = The device's UTC time is used for the
timestamp.
Note: The timestamp is contained in the XML body of the
SIP message. If the timestamp uses the UTC time, the
time is suffixed with the letter "Z", for example:
<associate-time>2017-09-
07T06:33:38
Z
</associate-time>
RADIUS and LDAP Parameters
This section describes the RADIUS and LDAP parameters.
General Parameters
The general RADIUS and LDAP parameters are described in the table below.
Table 60-41:General RADIUS and LDAP Parameters
Parameter Description
'Use Local Users Database'
configure system >
mgmt-auth > use-local-
users-db
[MgmtUseLocalUsersDatabase]
Defines when the device uses the Local Users table and
Authentication server (LDAP or RADIUS) for
authenticating users (based on login username-password
credentials) attempting to log in to the device's
management interface (e.g., Web or CLI).
■ [0] When No Auth Server Defined = (Default) If the
Authentication server denies user access, no
“fallback” to the device’s Local Users table occurs and
the user is denied access.
■ [1] Always = If the Authentication server denies user
access, the device uses the Local Users table to
authenticate the user.
Note:
■ If there is no response from the Authentication server
(connection timeout), you can configure (using the
MgmtBehaviorOnTimeout parameter) whether the
device denies access or whether it uses the Local
Users table to authenticate the user.
- 993 -