AudioCodes Mediant 4000 SBC, User Manual

Page: 498 / 1037

CHAPTER 20 SIP Definitions
Mediant 4000 SBC | User's Manual
The maximum group of numbers (consisting of single numbers and/or range of
numbers) that can be configured for prefixes and suffixes for all the Dial Plan rules can
be calculated by multiplying the maximum number of supported Dial Plan rules by six.
For example, if the maximum number of Dial Plan rules is 100, then the maximum group
of numbers is 600 (6*100). The following is an example of a Dial Plan rule that is
configured with six groups of numbers (each separated by a comma), consisting of
ranges and single numbers:
[120-125,150,160-164,170,200,210-215]
Dial Plans are configured using two tables with "parent-child" relationship:
■ Dial Plan table ("parent" table): Defines the name of the Dial Plan. You can configure up to 25
Dial Plans.
■ Dial Plan Rule table ("child" table): Defines the actual dial plans (rules) per Dial Plan. You can
configure up to 10,000 of dial plan rules in total (where all can be configured for one Dial Plan or
configured between different Dial Plans).
The following procedure describes how to configure Dial Plans through the Web interface. You can
also configure it through other management platforms:
■ Dial Plan table: ini file [DialPlan] or CLI (
configure voip > sbc dial-plan
)
■ Dial Plan Rule table: ini file (DialPlanRule) or CLI (configure voip > sbc dial-plan-rule)
➢
To configure Dial Plans:
1. Open the Dial Plan table ( Setup menu > Signaling & Media tab > SIP Definitions folder >
Dial Plan ).
2. Click New ; the following dialog box appears:
3. Configure a Dial Plan name according to the parameters described in the table below.
4. Click Apply .
Table 20-5: Dial Plan Table Parameter Descriptions
Parameter Description
'Index'
[DialPlan_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'Name'
name
[DialPlan_
Name]
Defines a descriptive name, which is used when associating the row in other
tables.
The valid value is a string of up to 15 characters.
Note:
- 465 -