AudioCodes Mediant 4000 SBC, User Manual

Page: 430 / 1037

CHAPTER 19 Coders and Profiles
Mediant 4000 SBC | User's Manual
Parameter Description
■ [1] Enable = The answer crypto line contains (or
excludes) an MKI value according to the selected
crypto line in the offer. For example, assume that the
device receives an INVITE containing the following two
crypto lines in SDP:
a=crypto:2 AES_CM_128_HMAC_SHA1_80
inline:TAaxNnQt8/qLQMnDuG4vxYfWl6K7eBK/ufk
04pR4|2^31|1:1
a=crypto:3 AES_CM_128_HMAC_SHA1_80
inline:bnuYZnMxSfUiGitviWJZmzr7OF3AiRO0l5V
nh0kH|2^31
The first crypto line includes the MKI parameter "1:1".
In the 200 OK response, the device selects one of the
crypto lines (i.e., '2' or '3'). Typically, it selects the first
line that supports the crypto suite. However, for SRTP-
to-SRTP in SBC sessions, it can be determined by the
remote side on the outgoing leg. If the device selects
crypto line '2', it includes the MKI parameter in its
answer SDP, for example:
a=crypto:2 AES_CM_128_HMAC_SHA1_80
inline:R1VyA1xV/qwBjkEklu4kSJyl3wCtYeZLq1/
QFuxw|2^31|1:1
If the device selects a crypto line that does not contain
the MKI parameter, then the MKI parameter is not
included in the crypto line in the SDP answer (even if
the SRTPTxPacketMKISize parameter is set to any
value other than 0).
Note: The corresponding global parameter is
EnableSymmetricMKI.
'MKI Size'
mki-size
[IpProfile_MKISize]
Defines the size (in bytes) of the Master Key Identifier
(MKI) in SRTP Tx packets.
The valid value is 0 to 4. The default is 0 (i.e., new keys are
generated without MKI).
Note:
■ The device can forward MKI size as is for SRTP-to-
SRTP flows or override the MKI size during negotiation.
This can be done on the inbound or outbound leg.
■ The corresponding global parameter is
SRTPTxPacketMKISize.
'SBC Enforce MKI Size'
sbc-enforce-mki-size
[IpProfile_SBCEnforceMKISize]
Enables negotiation of the Master Key Identifier (MKI)
length for SRTP-to-SRTP flows between SIP networks
(i.e., IP Groups). This includes the capability of modifying
the MKI length on the inbound or outbound SBC call leg for
the SIP entity associated with the IP Profile.
■ [0] Don't enforce = (Default) Device forwards the MKI
size as is.
- 397 -