AudioCodes Mediant 4000 SBC, User Manual

Page: 551 / 1037

CHAPTER 22 SBC Overview
Mediant 4000 SBC | User's Manual
Parameter Value Comment
'Path' "auth/realms/demo/protocol/openid-
connect/token/introspect" Relative URL for the
introspection service on the
server.
'Username' "device234" Username that the device uses
for authenticating the HTTP
POST introspection request
which it sends to the OAuth
server.
'Password' "12abMt" Password that the device
uses for authenticating the
HTTP POST introspection
request which it sends to the
OAuth server.
2. Select the Remote Web Service that you configured in Step 1, click the HTTP Remote Hosts
link located below the table, and then configure an HTTP Remote Host:
Parameter Value Comment
'Address' "oauth.example.com" Address of the Authentication server.
'Port' "443" Port number of the Authentication
server.
'Transport Type' HTTPS Secured HTTP.
3. Configure OAuth-based authentication for the source IP Group (client that the device needs to
authenticate):
Parameter Value Comment
'Authentication Mode' SBC as Server The device authenticates as a server.
'Authentication Method List' "register/setup-
invite" The SIP methods that the device
needs to authenticate.
'SBC Server Authentication
Type' Authenticate with
OAuth Server The device authenticates the SIP
requests with an OAuth Authentication
server.
'OAuth HTTP Service' OAuth-Server Assigns the Remote Web Service that
you configured (in Step 1) for the
OAuth Authentication server.
- 518 -