CHAPTER 17 Quality of Experience
Mediant 4000 SBC | User's Manual
8.
Click
New
, and then save your settings to flash memory.
Table 17-4: Quality of Experience Color Rules Table Parameter Descriptions
Parameter
Description
General
'Index'
index
[QOEColorRules_
ColorRuleIndex]
Defines an index number for the new table row.
Note:
Each row must be configured with a unique index.
'Monitored Parameter'
monitored-
parameter
[QOEColorRules_
monitoredParam]
Defines the parameter to monitor and report.
■
[0]
MOS
(default)
■
[1]
Delay
■
[2]
Packet Loss
■
[3]
Jitter
■
[4]
RERL [Echo]
'Direction'
direction
[QOEColorRules_
direction]
Defines the monitoring direction.
■
[0]
Device Side
(default)
■
[1]
Remote Side
'Sensitivity Level'
sensitivity-level
[QOEColorRules_
profile]
Defines the sensitivity level of the thresholds.
■
[0]
User Defined
= Need to define the thresholds in the
parameters described below.
■
[1]
Low
= Pre-configured low sensitivity threshold values.
Thus, reporting is done only if changes in parameters' values
are significant.
■
[2]
Medium
= (Default) Pre-configured medium sensitivity
threshold values.
■
[3]
High
= Pre-configured high sensitivity threshold values.
Thus, reporting is done for small fluctuations in parameter
values.
Thresholds
'Minor Threshold
(Yellow)'
minor-threshold-
yellow
[QOEColorRules_
MinorThreshold]
Defines the Minor threshold value, which is the lower threshold
located between the Yellow and Green states. To consider a
threshold crossing:
■
Increase in severity (i.e., Green to Yellow):
Only this value
is used.
■
Decrease in severity (Red to Green, or Yellow to Green):
This value is used with the hysteresis, configured by the 'Minor
Hysteresis (Yellow)' parameter (see below).
The valid threshold values are as follows:
■
MOS values are in multiples of 10. For example, to denote a
MOS of 3.2, the value 32 (i.e., 3.2*10) must be entered.
■
Delay values are in msec.
■
Packet Loss values are in percentage (%).
■
Jitter is in msec.
- 307 -
Summary of Contents for Mediant 4000 SBC
