AudioCodes Mediant 4000 SBC, User Manual

Page: 792 / 1037

CHAPTER 51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Metric Parameter Description
LocalID - Local ID - identifies the reporting endpoint for the
media session
RemoteID - Remote ID - identifies the remote endpoint of the
media session
OrigID - Originating ID - Identifies the endpoint which originated
the session
LocalAddr - Local Address - IP address, port, and SSRC of the
endpoint/UA which is the receiving end of the stream
being measured
RemoteAddr - Remote Address - IP address, port, and SSRC of the
the source of the stream being measured
LocalGroup - Local Group ID - identification for the purposes of
aggregation for the local endpoint
RemoteGroup - Remote Group ID - identification for the purposes of
aggregation for the remote endpoint
LocalMAC - Media Access Control (MAC) address of the local SIP
device
Timestamps START Start time of the media session.
STOP End time of the media session.
SessionDesc PT Payload Type - 'payload type' parameter in the RTP
packets (i.e., the codec).
PD Payload Description - description of the codec
SR Sample Rate - rate at which the voice was sampled
FD Frame Duration (msec) - packetization rate
FO Frame Octets - number of octets in each frame per
RTP packet
FPP Frames per Packets - number of frames per RTP
packet
PLC Packet Loss Concealment - indicates whether a PLC
algorithm was used for the session ("0" - unspecified;
"1" - disabled; "2" - enhanced; "3" - standard)
SSUP Silence Suppression State - indicates whether silence
suppression, also known as Voice Activity Detection
(VAD) is enabled ("on" or "off")
- 759 -