AudioCodes Mediant 4000 SBC, User Manual

Page: 59 / 1037

CHAPTER 6 Web-Based Management
Mediant 4000 SBC | User's Manual
4. If the Save button is surrounded by a red border, you must save your settings to
flash memory, otherwise they are discarded if the device resets (without a save to flash) or
powers off.
Assigning Rows from Other Tables
Some tables contain parameters whose value is an assigned row (referenced-row) from another
table (referenced-table). For example, the IP Groups table contains the 'Proxy Set' parameter
whose value is an assigned Proxy Set, configured in the Proxy Sets table. These parameter types
provide a drop-down list for selecting the value and a
View button, as shown in the example below:
You can assign a referenced-row using one of the following methods:
■ Selecting a referenced-row from the drop-down list:
● Scroll down to the desired item and click it.
● Search for the item by entering in the field the first few characters of the desired row, and
then clicking it. The figure below shows an example of searched results for items (Proxy
Sets) that begin with the letter "i":
■ Selecting an existing referenced-row directly from the referenced-table:
a. Click View ; the table (e.g., IP Groups table) and dialog box in which the button was clicked
is minimized to the bottom-left corner of the Web interface and the referenced-table (e.g.,
Proxy Sets table) opens.
b. Add a new row, if required; otherwise, skip this step.
c. Select the desired row in the row-referenced table, and then click Use selected row
located on the top-right of the table, as shown in the example below:
■ Adding a new referenced-row:
a. From the drop-down list, select the Add new option; as shown in the example below:
- 26 -