Atom Medical Corporation V-2200, Service Manual And Replacement Parts

Page: 165 / 212

163
Division Product inspection Serial No.
Section Display/control panel
Tools and jigs to be used
No Inspection procedure Remarks
5
Checking the maintenance screen display (past data screen)
Turn the incubator power switch off.
While pressing the M2 switch on the rear of the display with a pointed tool,
turn the power switch on.
Check that the past data screen appears following the start screen.
Check that when the Brightness Control switch is pressed, the page number
displayed in the middle of the screen is changed, and that the graph shows
the previous data.
Check that when the Screen Changeover switch is pressed, the graph on the
lower part of the screen is changed to the SpO
2
/pulse rate graph.
6
Checking the display output
Turn the incubator power switch off.
Connect the display/control panel to the display output port on the opposite
side of the main body.
Turn the power switch on, and check that the start screen and the numerical
value screen appear.
When the Brighness Control switch is pressed, the
page number displayed is changed.
When the Screen
Changeover switch is
pressed, the graph is
changed to the
SpO
2
/pulse rate graph.