Atom Medical Corporation V-2200, Service Manual And Replacement Parts

Page: 158 / 212

156
Division Adjustment Serial No.
Section Setting the clock
Tools and jigs to be used
No Adjustment procedure Remarks
1
Turn the power switch on to set the incubator in normal operation.
2
Press the Screen Changeover switch and the Brightness Control switch on the
control panel simultaneously.
3
The message “SETTING CLOCK” appears in the message area to enable the
setting of the clock.
Time and date is shown in the “Month/Day/Year Hour:Minute” format, and
the figure which can be set is flashing.
Each time the Screen Changeover switch is pressed, the flashing figure can be
changed, and each time the Brightness Control switch is pressed, the cursor
moves from one item to another.
4
Input the current date and time using the Screen Changeover switch and the
Brightness Control switch.
5
When the Brightness Control switch is pressed while the “minute” figure is
flashing, this procedure will be finished.
6 Confirm that the set time is displayed on the clock section of the display.
The flashing figure can be changed.
Message indicating that you can set the clock
Screen Changeover switch (to change a numerical value)
Brightness Control switch (to move the cursor)