Atom Medical Corporation V-2200, Service Manual And Replacement Parts

Page: 54 / 212

52
(3) Past data 2 screen
①
The upper part of the left portion of the screen shows a temperature (incubator air
temperature, skin temperature 1, skin temperature 2) graph. The lower part of the left
portion of the screen shows an SpO
2
and pulse rate graph.
②
The middle part of the left portion of the screen shows various markers indicating alarm
information.
③
The right portion of the screen constantly shows all the markers to be used on the screen
and what they mean.
④
The lower part of the right portion of the screen shows the latest time of the marker
indicating the beginning of communication or the stopping of communication for a
communication failure shown on the graph. The time shown at the bottom right of the
screen corresponds to the “0” on the horizontal axis on each page.
(4) Graphic display on the past data screen
①
Each graph can show seven pages of data, 70 minutes’ data per page, so that you can review
past 490 minutes’ (about 8 hours’) data. The middle part of the left portion of the screen
shows the page number of the data on the screen in the form of 1/7 ~ 7/7.
②
One division on the horizontal axis of each graph represents ten minutes. This applies to
the temperature graph, the relative humidity and oxygen concentration graph, and the
SpO
2
and pulse rate graph.
③
The divisions on the vertical axis of each graph is the same as those of the corresponding
trend graph of the incubator.
④
The latest data is shown on the first page. The oldest data is shown on the last page.
Every time the brightness switch is pressed, the next page will appear.