Atom Medical Corporation V-2200, Service Manual And Replacement Parts

Page: 109 / 212

107
7-4. Assembling Procedure
※
This section includes references to a unit equipped with the oxygen controller and the
weight monitor. If your unit is not quipped with these functions, skip over such references.
（１）
Main body of the infant incubator
Division Section Descriptions
Assembling the
sub-parts
Hood (slope type DA) Assembling the inner wall (front and rear)
Assembling the front admittance panel (front and rear)
Attaching the front admittance panel (front)
Attaching the front admittance panel (rear)
Assembling the right side
Assembling the left side
Top board (tilting12
°
)
Attaching the tilting device and the packing
Weight monitor
mattress platform Assembling the mattress platform
Mattress platform Assembling the mattress platform
Main body case Attaching the oxygen supply valve
Front panel Assembling the panel
Conditioning chamber Attaching the motor, the board, the fan, and the heater
Humidity chamber Assembling the humidity chamber, the boiler cap, and the
cartridge tank
Power unit Assembling the power box
Attaching the board and the board box
Board box Assembling the board box
External display Attaching the membrane switch
Assembling the LCD display
Main board box Attaching the board to the SpO
2
mounting plate
Assembling the main board box
Accessories The full set of parts contained in the accessories box
Assembling the
main body
Overall assembling of
the main body Attaching the filter case and the oxygen controller/
the oxygen supply port
Attaching the steam gate, the humidity chamber holder, and
the power unit
Attaching the main board box and the panel
Attaching the rear cover, the caps, and the power cord
Attaching the upper parts of the main body and the
humidity chamber
Attaching the pole arm and the external display