ATEN VK0100 User Manual Download Page 95

Page: 95 / 302

Chapter 4. ATEN Configurator (VK6000)

3. In the

Design

tab, do the following.

Create and configure a control interface (Viewer). For more
information, see

Design

, page 106.

(Optional) Set up scheduled events to automatically carry out specified
actions.

(Optional) Add additional conditions and actions to buttons using
Flags. For details, see

Flag

, page 160.

(Optional) Create a sequence of actions for a button by creating a
Macro. For details, see

Macro

, page 180.

(Optional) Create a Variable for a device setting that is controlled by
two or more components in one control interface. For details, see

Variables

, page 183.

4. In the

Upload

tab, upload this Viewer to the controller. For details, see

Upload

, page 189.

Summary of Contents for VK0100















































































































































































































































































































Search results

Summary of Contents for VK0100

Reviews:

ATEN VK0100, User Manual, Page: 95 / 302

Search results

Summary of Contents for VK0100

Reviews: