ATEN VK0100, User Manual, Page: 83 / 302

Chapter 3. Web-Based Configuration and
67
Access
The Access tab allows you to configure the access key (password) of the ATEN
controller’s web interface and to set a validity period for accessing the ATEN
Control System using an activation key.
Access Key The access key is the password that is required to do the following:
Š
Log in the ATEN controller’s web interface.
Š
Upload projects and Viewers from Configurator to ATEN
controller (page 189).
Download Viewers from ATEN controller to mobile devices using
ATEN Control System App (page 250).
The following settings are available:
Š
Current Access Key , New Access Key , Confirm Access
Key: Use these three fields to set or change the access key.
The default access key is password .
IMPORTANT: You will be prompted to modify the access key
before you can continue with accessing the web GUI or
uploading project files.
Note: A valid password should only contain upper-case
alphabets, lower-case alphabets, and/or numerals.
Š
Show on dashboard: Select this option to show the access
key setting on the Dashboard tab.
Š
Enable Viewer Access Key: Select this option to request for
the access key when uploading projects and Viewers to the
ATEN controller or when downloading Viewers to mobile
devices. Once enabled, you can also configure this setting from
the Dashboard tab.