manualshive.com logo in svg

ATEN VK0100, User Manual, Page: 66 / 302

Share
Download
ATEN VK0100 User Manual Download Page 66

ATEN Control System User Manual

50

LED Indications

Refer to the table below for the status descriptions of a Keypad indicated by 
button LEDs.

8

LAN Port

Š

Connects the Keypad to LAN

Š

Supplies power (PoE) if a power sourcing equipment is 
installed.

Keypad Button

LED Activity

Control Pad Status

One button LED

lights orange

The Keypad is powered on and the button 
is currently off.

lights white

The Keypad is powered on and the button 
is currently on.

blinks orange and 
white repeatedly

The function assigned to the button is 
being executed.

All button LEDs

blink orange and 
white repeatedly

The firmware of the Control Pad is being 
upgraded.

blink orange

The Keypad is disconnected from the 
controller.

No.

Component

Description

Summary of Contents for VK0100















































































































































































































































































































Reviews:

No comments