ATEN VK0100, User Manual, Page: 203 / 302

Chapter 4. ATEN Configurator (VK6000)
187
Š
Execute commands with no conditions: Execute the command
(action) when the specified Variable changes.
Š Execute commands with the specified conditions: Execute the
corresponding command (action) when the Variable matches.
2. Configure control components for the Viewer.
a) Add a control component to the Viewer. For details, see Design ,
page 106.
Note: Make sure to configure the component mode before proceeding
to the next step.
b) For a slider bar component, click it and configure value settings in
Properties.
c) Click Set Variable , and then double-click the Variable you created in
step 1.
d) In Properties, click Set Sync Condition and select the Variable you
created using the drop-down list.
3. Repeat steps (a) to (d) with each of the components.If you select Execute
commands with the specified conditions , follow the steps below to add
commands.
a) Refer to step 4 to first configure the UI components.
b) Click Library, click the Variable icon, and then click the Variable
you created in step 1.
c) Click the drop-down list below the Execute commands with the
specified conditions option and select a condition.