
ATEN Control System User Manual
64
Date & Time
Automatically
Time Zone
: Select a time zone for the controller. Choose
the city that most closely corresponds to where it is located.
NTP Server Settings
Assign an NTP server for the controller to synchronizes its
clock. If the controller has access to the Internet, configure the
Preferred NTP Server
and
Alternate NTP Server
settings. If
the controller is installed in a closed network, configure the
Preferred Customer Server IP
and
Alternate Customer
Server IP
settings.
Preferred NTP Server
: Select an NTP server to provide
synchronization services to the controller. Make sure to use
an NTP server that is located close to where the controller
is installed to minimize propagation delays.
Alternate NTP Server
: Select an alternate NTP server to
which the controller connects when it is unable to connect
to the preferred NTP server.
Preferred Customer Server IP:
Select this option to use a
private NTP server if the controller is installed in a closed
network.
Alternate Customer Server IP:
Select this option to set up
a substitute server if the controller is unable to connect to
the preferred server.
Adjust Time
: Sets the interval at which the controller
synchronizes its clock with the assigned NTP server.
Sync
: Click this button to save your configuration and start
synchronizing its clock with the assigned NTP server.
Manually
: Use the drop-down lists to set the controller’s time
zone, date, and time.
Firmware
Displays the Current Firmware version and option to upgrade.
Click
Update Firmware
to open the
Firmware Upgrade
window.
Click
Browse
to select the firmware upgrade file.
When
Check FW Version
is selected, the system will check the
current firmware version against the one being used to upgrade the
controller. If the device version is higher than the upgrade version a
dialog box informs you and gives you the option to continue or
cancel.
After the file has been selected, click
Update
to start the firmware
upgrade.
Summary of Contents for VK0100
