ATEN VK0100, User Manual, Page: 272 / 302

ATEN Control System User Manual
256
Specifications
VK0100/VK0200
VK0100 VK0200
Interface
Keypad Layout Up to 14 layout variations
using 4 ~ 8 buttons Up to 125 layout variations
using 6 ~ 12 buttons
Serial • 2 x Bi-directional RS-232 Port (2 x 3-Pole Terminal
Block Connector)
• Baud Rate: 300 to 115200 (default: 9600)
• Data Bit: 8 (default) or 7
• Stop Bit: 1 (default) or 2
• Parity: None (default), even or odd
Relay • 2 x Relay Channel (2 x 2-Pole Terminal Block
Connector)
• Normally open, isolated Relays
• Contact Rating: Max 24 VDC, 1A
Digital Input • 1 x Digital Input Channel (1 x 2-Pole Terminal Block
Connector);
• VDC Mode
- Input Voltage Range: 0 to 5 VDC
- Programmable Range: 1 to 5 VDC
• Dry Contact Mode
- Pull-up 2k ohms to + 5 VDC
Ethernet • 1 x RJ-45 Female, 10/100Base-T
• Supported Protocol: ARP, ICMP, TCP/IP, DHCP,
HTTPS, SSH
• DHCP-enabled. The following default IP settings will
be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches & Buttons
Controller ID Switch 1 x 16-segment Switch
Reset Button 1 x Semi-recessed Pushbutton
Power