ATEN VK0100, User Manual, Page: 28 / 302

ATEN Control System User Manual
12
5 Ethernet LED The LEDs provide information about the network
connection:
Š
Link : The LED blinks green to indicate Ethernet signals
are being transmitted.
Š
ACT : The LED lights green to indicate 100Mbps transmis
-
sions.
6 DC Overload LED The LED lights orange to indicate DC output exceeds
maximum output.
Note: When the LED lights orange, please unplug any of the
connected devices to keep its total output under 24W.
7 IR Receiver / LED This IR receiver passes the functions of a remote control to
the VK2100 in learning mode. The distance between the IR
remote and the receiver window should be kept under 10cm
with a direct line of sight.
Š
The LED blinks green to indicate the unit is ready to
receive signals from an IR remote control.
8 USB Port / LED This is where a USB device plugs in to upload Viewers to
the VK2100.
Š
The LED blinks green to indicate that Viewers are being
uploaded, and lights green to indicate that the upload was
successful.
Š
The LED lights orange to indicate Viewers were not
successfully uploaded.
9 Reset Switch
Š
To clear all the configurations except the network
settings, press and hold the Reset
Switch for 8 seconds.
Š
To reset the network settings, press the Reset Switch
once.
10 Power LED Lights green when the unit is turned on.
No. Component Description