manualshive.com logo in svg

ATEN VK0100, User Manual, Page: 2 / 302

Share
Download
ATEN VK0100 User Manual Download Page 2

ATEN Control System User Manual

ii

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE 
STATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own expense.

FCC Caution: 

Any changes or modifications not expressly approved by the party 

responsible for compliance could void the user's authority to operate this equipment.

Warning

: Operation of this equipment in a residential environment could cause radio 

interference.

KCC Statement

RoHS

This product is RoHS compliant.

Safety

This product has been classified as Information Technology Equipment.

Summary of Contents for VK0100















































































































































































































































































































Reviews:

No comments