ATEN VK0100, User Manual, Page: 56 / 302

ATEN Control System User Manual
40
5. Use the ID Switch to assign an ID to the Control Pad.
Note: It is possible to install more than 16 controllers under the same
subnet. In which case, the 17th controller and the ones added after
that will each be sharing its ID with another controller. If you have
any ATEN Expansion Box and/or Keypad connected to controllers
using shared IDs, reconfigure the connection mode. For details, see
Controller Properties , page 95.
6. Power on all the devices. The button LEDs light orange.
7. Assemble the button caps onto the Control Pad.
a) Assemble button caps of the same row with each other.
b) From the top row, attach each row of button caps to the Control Pad by
pressing on the hinges.
Caution: When removing button caps, place your fingers on the top of
button caps and then press downwards, as illustrated below. Pressing
upwards from the bottom may cause damages to the button caps.