ATEN VK0100, User Manual, Page: 31 / 302

Chapter 2. Hardware Setup and Panel Oper
-
15
7 USB Port / LED This is where a USB device plugs in to upload Viewers
to the VK1100.
Š
The LED blinks green to indicate that Viewers are
being uploaded, and lights green to indicate a
successful upload of Viewers.
Š
The LED lights orange to indicate that Viewers were
not successfully uploaded.
8 Controller ID Switch This 16-segment switch is used to set an ID for the
controller.
9 Reset Switch
Š
To clear all the configurations except the network
settings, press and hold the Reset
Switch for 8
seconds.
Š
To reset the network settings, press the Reset
Switch once.
10 Power LED Lights green when the unit is turned on.
No. Component Description