ATEN VK0100, User Manual, Page: 32 / 302

ATEN Control System User Manual
16
VK1100 Rear View
No. Component Description
1 Power Socket This is a standard 3-pin AC power socket. The power
cord from an AC source plugs in here.
2 Power Switch This is a standard rocker switch that powers the unit
on and off.
3 Relay Channels Four channels; normally open, isolated relays with a
contact rating of 24VDC, 2A max.
4 DC Output Ports One output provides a total power output of 12W max.
5 IR / Serial Ports Two IR ports that can also be configured as RS-232
TX ports. pin1: Signal / pin2: Ground.
6 RS-232/422/485
Serial Ports Two ports with supported RS-232/422/485 conversion
by pin assignment and RTS/CTS flow control. The
RS232, RS422, or RS485 connection is defined by
pin. For pin assignments, see page 33.
7 Ethernet Port This RJ-45 port is used for the network connection. If
no IP address is assigned within 30 seconds, the
default IP settings will be used:
IP: 192.168.0.60 / mask: 255.255.255.0
8 Grounding Terminal The grounding wire attaches here.
1 2 3 4 5 7 6
8