ATEN VK0100, User Manual, Page: 151 / 302

Chapter 4. ATEN Configurator (VK6000)
135
You can configure a button with Device commands (On, Off, Stop, Play, etc.);
as a Macro to send multiple commands to one or more devices; or as a Link
to other Viewer pages. Advanced Options allow you to add conditions to the
commands, as described on the next page.
Commands Lists the commands that initiate when the button or dial key is
pressed.
Device and Advanced Option functions can be added
and associated in the Commands list together. Commands
initiate in the order that they are added to the list. Right-click in
the Commands list to use the menu selections:
Move Up , Move
Down , Copy , Paste , Delete , Save as Macro , or Test Tool .
Toggle ON /
Toggle OFF
or
Press / Release When the Button Mode (page 118) is set to Toggle or Press and
Release , the Commands list splits to set the two c commands:
Toggle ON / Press – lists the commands that initiate when the
button is first pressed or pressed and held.
Toggle OFF / Release – lists the commands that initiate when
the button is pressed a second time (Toggle), or released (Press
and Release). When the button is pressed again,
Toggle ON
initiates and the cycle repeats.
The Level drop-down menu appears when an Advanced Slider
Bar is selected on the Viewer page. The number of levels in the
drop-down menu reflect the
Level set in the Advanced Slider
Bar’s properties (page 124). Use the drop-down menu to select a
level and then add a command for each of the Advanced Slider
Bar’s levels (see page 140 for details).
Use Move up to move an action up in the Commands list, or
Move down to move an action down in the Commands list.
Use Delete to remove an action from the Commands list.
Use Save as Macro to save the commands in the Commands
list as a macro.
Use Test Tool to connect to a controller and test the action(s) in
the Commands list.
Setting Description