ATEN VK0100 User Manual Download Page 208

Page: 208 / 302

ATEN Control System User Manual

192

Viewing Controller Information

Click

to view the controller’s information.

IP Address

: Displays the IP address.

MAC Address

: Displays the MAC address.

License

: Displays the number of licenses available and in use.

Select License

: Allows you to load a new license file.

Reset License

: Resets all license(s) in use by mobile devices. This will

disconnect all mobile device connections to the controller.

Firmware Version

: Displays the firmware version.

Select Firmware

: Allows you to load a firmware upgrade file to update

the firmware.

Capacity

: Displays the amount of space available for uploading Viewers.

Viewers

: Lists the Viewers currently stored on the controller.

Remove Viewer

: Click the trash can icon to remove the Viewer stored

on the controller.

Project:

Lists the project file currently stored in the controller.

Summary of Contents for VK0100















































































































































































































































































































Search results

Summary of Contents for VK0100

Reviews:

ATEN VK0100, User Manual, Page: 208 / 302

Search results

Summary of Contents for VK0100

Reviews: